By hand

To remove:

• Slide the green centre piece to the RHS - this will leave a hole.
• Pull your curtains down. If the green centre piece hasn’t been used for some time it may be a bit stiff, in this case get a flat blade screw driver and slide it across with this.

To put back up:

• Feed the gliders back into the track.
• Slide the green centre peice closed again.

By Lifting Rod

To remove:

• Move all your curtains to the LHS.
• Slide the green centre piece to the RHS this will leave a hole.
• Make sure the sliding handle of the lifting rod is slide fully down away from the green end.
• Hold the lifting rod vertical and insert it into the hole with the 2 green lugs facing away from the green slider.
• Gently tilt the lifting rod until it’s on about a 45 degree angle and is locked into the track.
• Grab the curtain with your other hand and pull it down onto the lifting rod.
• Slide your curtains onto the lifting rod.
• Once your curtains are fully on lifting rod tilt the lifting rod vertical and take down.
• Slide your curtains off the lifting rod.
  

To put back up:

• Make sure the sliding handle of the lifting rod is slide fully down away from the green end.
• Feed your curtains onto the lifting rod the right way around.
• Hold the lifting rod vertical and insert it into the hole with the 2 green lugs facing away from the green slider.
• Gently tilt the lifting rod until it’s on about a 45 degree angle and is locked into the track.
• While supporting the weight of the curtains with your shoulder take the handle of the lifting rod and gently slide it up.
• Your curtains should now slide onto the track.
• Slide the handle back down.
• Move rod back to vertical position and remove from track.
• Slide the green centre peice closed again.